Hey community I’m putting together a list of issues known to the Cube Orange, if you are currently working with a Cube Orange and PX4 or have worked with them in the past and know of an issue, please share it below. We are hoping to make a plan to address some of the major issues together with the m…

Ok, I have an update: finally assembled my S500 with Cube Orange, put PX4 1.13.0 on it and it flew very well. I am not sure what we experienced in the beginning, a few years ago, but at the moment it’s all fine for me wrt the basics. Cheers, Raymond

Thanks @reedev good to know cc @dagar

Ok, I had an interesting experience today, with a failing calibration of a Cube Orange based setup. I cannot calibrate this setup and I wonder how to report this. I would love to help but at this moment the best I can do is testing and reporting. The biggest difference compared to last time is that…

[image] reedev: What’s the best way to proceed? I would say create a log from boot with high rate sensor logging where you do the calibration to show how it fails. Then you stop the log and upload the logfile to logs.px4.io and link it in a PX4 issue (or here). That would probably be helpful …

We sometimes observe that the Cube Orange looses all its parameters or set them to default values. We have no clue why or in which situations the reset occures. Only thing we noticed is that it mostly occures when we do a “Reboot Vehicle” via QGroundControl. Currently in use is a custom version of…

Is this thread still alive? Lately I am experiencing issues with 2 Cube Oranges: they don’t respond properly anymore, as if parts in it are slowly dying… I’ve used these before, uploading firmware frequently… This is what I get: Nov 16 17:59:50 traveller kernel: [ 1511.349645] usb 1-4: new full-s…

This is regarding GPS NMEA messages not being read by Pixhawk v2.1 CUBE with PX4 stack . My GPS module outputs GNGGA , GNGSA ,GPGSV , GQGSV , GAGSV , GBGSV , GNSVD,GNRMC , GNGST . I am surprised not one of these messages are detected by Orange CUBE Px4 !

Hi, I am glad one developer is here to support the px4 forum…:slight_smile: …

Hi, I am getting an error message of “Accel 1 clipping, not safe to fly” on cube orange with PX4 version 1.13.2 but when change the firmware to 1.11.0, Accel 1 clipping error doesn’t show up. Is this an issue of the firmware?

Cube Orange Support Thread

PX4 Autopilot

JulianOes November 20, 2022, 10:08pm 25

@sibujacob that’s not Cube specific, let’s follow up in Enabling GPS using NMEA - #3 by sibujacob

Topic		Replies	Views
High vibration in Cube Orange+ v1.13	112	6844	May 10, 2025
Firmware v1.15 stable _ GPS not detected _ CUBE orange _ Herelink PX4 Autopilot	16	729	November 6, 2024
Unable to connect to MAVLink Console with Orange Cube MAVLink	52	3376	April 17, 2024
UM982 isn't providing heading data PX4 Autopilot	37	3168	March 14, 2025
Power loss during the flight(mission mode)	23	1256	December 5, 2024

Cube Orange Support Thread

Related topics