@JulianOes Pixhawk 6C, V1.14 Tilt Rotor standard config: 3 (FL) 1 (FR) 2 (RL) 4 (RR) The drone was on ground all the time, as we were checking the correct reaction from drone according to pilot command. log file: https://review.px4.io/plot_app?log=582994c6-17cf-451b-9234-42a5acea119b as can b…

Have a look at this: PX4-Autopilot v1.14 Release Notes | PX4 User Guide (v1.14) PX4 is the Professional Autopilot. Developed by world-class developers from industry and academia, and supported by an active world wide community, it powers all kinds of vehicles from racing and cargo drone…

So, at idle throttle, right after arming, are all props spinning at a minimum (but not zero) speed?

No, at arming there are not turning with minimum speed. The min PWM values for motors were 1000, they did not turn. I increased the min PWM to 1100, still they were not turning.

log: https://review.px4.io/plot_app?log=54d43c09-e4fc-4880-9937-05b351327d0d I did testing again yesterday. I recalibrate the ESC. and tested everything. As you can see, the respected motors gets zero output and they stopped turning when i give pitch, roll or yaw. PWM 1000-2000 and disarmed 800.

@JulianOes help would be amazing, as we are stagnated here. Not able to perform further flight test.

Motor stopped spinning

PX4 Autopilot

JulianOes December 16, 2023, 7:21pm 6

Have a look at this:

My problem is that when arm executing the arming command, there is a sound but the propeller does not rotate. Do you know what parameter to set to set the spin speed when arm? please help me!

Topic		Replies	Views
Vehicle arms but motors dont spin PX4 Autopilot	3	803	August 1, 2024
Armed but no PWM output / motors not spinning PX4 Autopilot	14	8411	March 19, 2025
Unstable Motors output - Cube Orange Hexarotor x PX4 Autopilot	7	1801	July 10, 2023
PX4 Fixed-Wing: Motor Not Spinning During Mission/Takeoff Despite Working in Actuator Test (Pixhawk 2.4.8) Pixhawk	1	91	May 24, 2025
[Help] Sudden Motor 1 Stop During Descent - Pixhawk 6X + XRotor 40A Flight Testing & Log Analysis	5	93	August 6, 2025

Motor stopped spinning

Related topics