Throttle Loss - Manual Control Inputs - Interference

Currently using a Tarot X8 frame with a 22.2V 6s Battery connected to a PX4.
All my recent flights had some sort of throttle loss associated with manual control inputs; however, the throttle knob was at a fixed position and no RC loss detected, could be this an interference problem?
How can I solve this issue?

Here is my most recent flight log:

Don’t know about the throttle loss, but I noticed something else. You seem to have quite bad vibrations in your drone, which you should probably fix. Take a look at this and find the raw acceleration plot and compare it to yours. That won’t solve your problem, but should generally give you a better flight if you can solve it.