PX4 1.16.0 CubePilot OrangePlus Auto/Mission mode throttle issue

[Sayshara]

Similar issue:

Throttle Drops Down to 0% while Mode Changing

I’m working on an turbine engine project with PX4. While I was starting the engine with stabilized mode engine is working good but when I wanted to change mode to mission throttle value dropped down to 0 for 0.3sec and after that it increased to the value which I specified in RWTO parameters. In this transition period turbine engine is stopping. In electrical or IC engines this is not a problem but turbine engines are more sensitive. First I increased the ramp up time from RWTO parameters but i…

Quite dangerous issue if this is common.