Hey I am Flying a Mini Talon V-Tail with PX4-Autopilot 1.14.3. I Had used a lot of Digital FPV systems but I am more comfortabe with Analog VTX’s
The digital ones I could connect via Telem Port to the Caddx Vista modules and got the OSD.
But now I want to use the Foxeer Reaper VTX (Foxeer 5.8G Reaper Extreme 1.8W 72CH VTx) which is analog. Dos anyone can help me how to connect it to my Flightcontroller to get the OSD with all Data ?
Thanks in advance
For analog you don’t use the TELEM port — you need to run the camera → FC video in, then FC video out → VTX. The OSD chip in the Pixhawk will overlay flight data onto the video feed automatically. Just wire the Foxeer Reaper like any other analog VTX: power + ground + video in from the FC’s “OSD out”.
1 Like
Sorry I forgot to mention I am usin Holybro 6c Mini and holybo 6X. There is no Video port only telem rc i2c and ps ports
Ah got it — the Holybro Pixhawk 6C/6X don’t have the analog OSD hardware onboard, only digital telemetry. That means you can’t do analog OSD directly through the FC. You’ll need an external OSD board (like a MinimOSD or Matek OSD) between camera and VTX if you want the flight data overlay.
1 Like
Oh okay, is it this thing?
Is there any good user description/manual?
yes
User Manual:
1 Like
This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.