Hi,
My mixer files seems not to be correct. For example the Elevator on Aux 2 output doesn’t work. Also the Landing Gear mix (Main 7 + 8) seems not to work, but this has probably also to do with being recognized in “landed” state.
Maybe someone has a hint for me? The rest is working properly.
I’m loading the mixer files with the config.txt on the SD Card in SDCard\etc\config.txt.
config.txt:
++++++++++++++++++++
set MIXER p38
set MIXER_AUX
++++++++++++++++++++++++
the mixer files are stored in SDCard\etc\mixers
file p38.aux.mix:
++++++++++++++++++++
Yaw mixers - Front wheel - Aux 1
M: 1
O: 10000 10000 0 -10000 10000
S: 0 2 10000 10000 0 -10000 10000
Elevator mixers - Aux 2
M: 1
O: 10000 10000 0 -10000 10000
S: 0 1 10000 10000 0 -10000 10000
file p38.mix
++++++++++++++++++++
aileron mixers - MAIN 1
M: 1
O: 10000 10000 0 -10000 10000
S: 0 0 10000 10000 0 -10000 10000
elevator mixers - MAIN 2
M: 1
O: 10000 10000 0 -10000 10000
S: 0 1 10000 10000 0 -10000 10000
rudder mixers - MAIN 3
M: 1
O: 10000 10000 0 -10000 10000
S: 0 2 10000 10000 0 -10000 10000
throttle mixers - MAIN 4
M: 1
O: 10000 10000 0 -10000 10000
S: 0 3 10000 10000 0 -10000 10000
Flaps mixers - MAIN 5
M: 1
O: 10000 10000 0 -10000 10000
S: 0 4 10000 10000 0 -10000 10000
Flaps mixers - MAIN 6
M: 1
O: 10000 10000 0 -10000 10000
S: 0 4 10000 10000 0 -10000 10000
landing gear mixers - MAIN 7
M: 1
O: 10000 10000 0 -10000 10000
S: 0 7 10000 10000 0 -10000 10000
landing gear mixers - MAIN 8
M: 1
O: 10000 10000 0 -10000 10000
S: 0 7 10000 10000 0 -10000 10000
++++++++++++++++++++