Hi all, I tried to create a mission and upload it to my drone (Intel Aero Ready to Fly Drone). But I always get the error ‘Unable to write on Micro SD’. What could be the reason for this? And any idea how I can fix this? Any suggestion is very much appreciated. Regards, Hasini

Hasini. I have the same problem. Did you find out why?.

Hi Luis, I am still stuck in this. But I found this thread. It might help you. [image] PX4Firmware on Rapi can't save missions Configuration & Flight Modes ⚙️ Rapi 2B + Raspbian Lite + Firmware1.5.5 with modifications that make px4 to run without Navio2 board. I got “Cr…

Long time had passed… I have fixed it with a simple line “dataman start” in startup script.

Hello, I’m experiencing the same issue on a ModalAI m500 platform. where is the startup script you are referring to? can you paste your startup script here?

I am facing this issue right now, I am using MAVSDK from Onboard computer to send mission to FC , It was actually working fine some time but now suddenly the issure is coming “Waypoint could not be read” and “Unable to write on SD Card”

Cannot Upload Mission

PX4 Autopilot

hvabey April 25, 2018, 9:45am 3

Hi Luis,

I am still stuck in this. But I found this thread. It might help you.

If you find out a fix, please post it here too

Regards,
Hasini

Topic		Replies	Views
PX4Firmware on Rapi can't save missions PX4 Autopilot	3	1574	April 2, 2019
Unable to Upload Missions Using QGroundControl	0	1287	March 6, 2018
How to set mission mode in application in Pixhawk? Pixhawk	17	1852	May 6, 2019
Mission in PX4 fixed wing vehicle PX4 Autopilot	4	656	August 6, 2022
QGC cannot write on PX4 microsd QGroundControl	2	495	February 17, 2020

Cannot Upload Mission

Related topics