What does this mean? This is what I get when I try to build the PX4 from the terminal now. It worked fine the first time. But then I had to run another script to install a different version of the arm-gcc. I tried to restore things by running the ubuntu_sim_nuttx.sh script. This is what I got from …

You need to make sure your PATH variable is set correctly. I suggest that you do echo $PATH to see what it is set to and then open ~/.profile and check your entries there. If you find older entries (e.g. gcc 5.4.1) you can remove these lines. $ make px4_fmu-v5_default ninja: no work to do. I …

This is what I see: ~$ echo $PATH /home/safat/gcc-arm-none-eabi-5_4-2017q2/bin:/home/safat/gcc-arm-none-eabi-7-2017-q4-major/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin When I open ~/.profile with gedit, this is what I see: # ~/.profile: …

GCC Toolchain & PX4 build problem (ninja: no work to do)

JulianOes March 19, 2019, 8:15am 4

Ok, check your .bashrc (or .zshrc if you’re using zsh), or check .xprofile.

Topic		Replies	Views
Error while building PX4 firmware for PX4FMU-V2	11	3083	August 17, 2017
Can not build PX4 firmware on ubuntu	3	1477	September 25, 2017
PX4 V1.13.0 conflicting declaration of c functiond PX4 Autopilot	7	1682	February 20, 2023
PX4 Build Issue - Nuttx Config Mismatch	4	658	December 10, 2023
Unable to locate package "gcc-arm-embedded" PX4 Autopilot	5	9671	March 18, 2019

GCC Toolchain & PX4 build problem (ninja: no work to do)

Related topics