Pixhawk Fixed wing Turbine setup

Hi Guys

I am fairly new to this forum, but it’s awesome to have a place to discuss different topics.

I have been experimenting with the Pixhawk for the past few months on a 50 CC ICE plane and so far everything is going well. My next step is to hook up the Pixhawk to a turbine-Jet plane. My question is will the Pixhawk be able to hand the turbine, and how will it cope with the spool up of the turbine, it’s roughly about 4 sec from idle to full power.

Any suggestions from the Dev team would be great!!

Thank you

Hey did you get any solutions regarding this? I am also trying to hook up the Pixhawk with jet engine.

im looking to do the same, i saw that you can setup the pwm output in disarm value with pwm_main_dis3 for set the ecu of the turbine to ready state and pwm_main_min and pwm_main_max to setup the normal throttle to prevent shutdown from the fc, after you land you disarm and in theory pwm will be back to pwm_main_dis3 with tells the ecu to disarm, i didnt try this but in theory should work