Hardware/Pixhawk Dev Call: Apr 21, 2020

Apr 21, 2020

Call Moderators


  • Pixhawk Standard FMUv[5X, 6, 6X]
  • Pixhawk Smart Battery
  • Pixhawk Payload

Dail In

Join Zoom Meeting

One tap mobile
+14086380968,567710856# US (San Jose)
+16468769923,567710856# US (New York)

Dial by your location
+1 408 638 0968 US (San Jose)
+1 646 876 9923 US (New York)
+1 669 900 6833 US (San Jose)
Meeting ID: 567 710 856

Find your local number: https://zoom.us/u/aetSYKbiMF

BMS Work Group

Group Goals

Standardize as much as possible the BMS hardware and software for the UAV industry, using open-source tools. The vendors attending have expressed interest and already have partly identified and solved common problems. The main goal is to define the basic system and interfaces, followed by the proper software protocol and subsequent implementation on PX4.

:point_down: Detailed minutes found on work doc. This doc is public. (please request edit access if you wish to contribute)

Payload Work Group

Group Goals

The payload working group is tasked with defining the needs of a cross-vendor MAVLink enabled payload interface using open-source. The goal is to define or augment the payload management sub-protocol in MAVLink and define the minimum requirements for a Hardware implementation.

:point_down: See doc for full info on wg, document is public. (please request access if you wish to contribute)

Errata and Feedback

Let me know below if I failed to capture anything the right way, and if there are any updates, or you have feedback on the call format.

Please find the meeting minutes over at the Pixhawk mailing-list archive