# Video stream from docker

**URL:** <https://discuss.px4.io/t/video-stream-from-docker/32466>\
**Category:** Uncategorized\
**Created:** [May 30, 2023, 11:32am UTC](https://discuss.px4.io/t/video-stream-from-docker/32466 "2023-05-30T11:32:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lukas](https://discuss.px4.io/letter_avatar_proxy/v4/letter/l/e9a140/32.png) [@Lukas](https://discuss.px4.io/u/Lukas)\
**Post date:** [May 30, 2023, 11:32am UTC](https://discuss.px4.io/t/video-stream-from-docker/32466/1 "2023-05-30T11:32:01Z")

</div>

Hi everyone,  
I have simulation in docker and it works fine, only issue is that I am unable to connect to video stream from gazebo\_gst\_camera\_plugin (simulated FPV). It works just fine without docker, but when I run the simulation from docker I just dont know what to do? I publish the ports with the video, but they seems to be dead in Wireshark. I am unable to connect to them with QGC, since the port is already used by docker and when I create a commlink for those ports, the camera settings again says the address is already used. Do I need some GStream server inside the docker?  
Thank you in advance, Lukas

---

<div class="post-metadata">

**Author:** ![Lukas](https://discuss.px4.io/letter_avatar_proxy/v4/letter/l/e9a140/32.png) [@Lukas](https://discuss.px4.io/u/Lukas)\
**Post date:** [May 31, 2023, 12:18pm UTC](https://discuss.px4.io/t/video-stream-from-docker/32466/2 "2023-05-31T12:18:48Z")

</div>

ok, the solution is, that in the jinja file for drone model, it needs to say for gst\_camera\_plugin udpHost = host.docker.internal instead of hardcoded 127.0.0.1 and it starts to work 🙂