# Steering logic in ArduRover + Pixhawk Cube Orange + VESC Flipsky via DroneCAN

**URL:** <https://discuss.px4.io/t/steering-logic-in-ardurover-pixhawk-cube-orange-vesc-flipsky-via-dronecan/48880>\
**Category:** Pixhawk\
**Created:** [April 22, 2026, 12:50pm UTC](https://discuss.px4.io/t/steering-logic-in-ardurover-pixhawk-cube-orange-vesc-flipsky-via-dronecan/48880 "2026-04-22T12:50:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tngi](https://discuss.px4.io/user_avatar/discuss.px4.io/tngi/32/21485_2.png) [@Tngi](https://discuss.px4.io/u/Tngi)\
**Post date:** [April 22, 2026, 12:50pm UTC](https://discuss.px4.io/t/steering-logic-in-ardurover-pixhawk-cube-orange-vesc-flipsky-via-dronecan/48880/1 "2026-04-22T12:50:14Z")

</div>

Hello. I have motors with hall sensors, and my question is whether in Steering mode in ArduRover in 0 position of the Throttle stick, will hold 0 speed or would it just reset the outputs and won’t command active torque until another torque command is given. So for example, let’s say i wanna stop on a hill for a few seconds in Steering mode, will ArduRover command some torque to the motors to hold it still or will it just roll down the hill as soon as i stop and release the Throttle stick to 0?

---

<div class="post-metadata">

**Author:** ![system](https://discuss.px4.io/uploads/default/original/3X/7/3/73ce918bdcd64854de904f0c8d9ab70ca9723f2a.png) [@system](https://discuss.px4.io/u/system)\
**Post date:** [July 21, 2026, 12:50pm UTC](https://discuss.px4.io/t/steering-logic-in-ardurover-pixhawk-cube-orange-vesc-flipsky-via-dronecan/48880/2 "2026-07-21T12:50:32Z")

</div>

Closed on July 21, 2026, 12:50pm UTC

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.
