# Rover doesn't move in mission mode PX4 **URL:** \ **Category:** QGroundControl\ **Created:** [November 13, 2023, 7:44pm UTC](https://discuss.px4.io/t/rover-doesnt-move-in-mission-mode-px4/35278 "2023-11-13T19:44:13Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![dwurmitzer](https://discuss.px4.io/letter_avatar_proxy/v4/letter/d/d2c977/32.png) [@dwurmitzer](https://discuss.px4.io/u/dwurmitzer)\ **Post date:** [November 13, 2023, 7:44pm UTC](https://discuss.px4.io/t/rover-doesnt-move-in-mission-mode-px4/35278/1 "2023-11-13T19:44:13Z")
Hello everyone! I have built a rover with a Pixhawk 6c Mini. Flashed it with PX4 Autopilot, configured all sensors, the radio and the servos. Have tried the Manual Mode via RC and the rover drives perfectly. Now the issue: I have created a Mission in QGC and uploaded it to the controller via USB. Then I unglugged the USB-cable and switched on the Mission Mode via RC but the rover doesn’t start moving… I am grateful for any help! Some additional information: - Hardware: NXP-Buggy3-Kit with Pixhawk 6c Mini - Firmware: PX4 1.13.3 - Airframe: Rover - Vehicle: Generic Ground Vehicle - The Mission has a starting point, some waypoints and RTL. - Initial Waypoint Altitude is 0.0 - Pictures of the rover and some screenshots are added on ![20231013_224435](https://discuss.px4.io/uploads/default/original/2X/e/ea6d42d4b653a4ee3e25bf0b7ae8cbc8515513f8.jpeg) ![20231013_224517](https://discuss.px4.io/uploads/default/original/2X/4/428f7f375c8ca87b6977c5c7e33fb700681d9888.jpeg) ![QGroundcontrol_PX4_Summary](https://discuss.px4.io/uploads/default/original/2X/b/bfaa938d7364dca19bad1f3ef3fd0885fa524f7d.png) ![QGroundcontrol_PX4_Plan_Mission](https://discuss.px4.io/uploads/default/original/2X/a/ac2f7533d26a685a3ea3d5990339d876d853e40e.jpeg) ---
**Author:** ![Ke2023](https://discuss.px4.io/user_avatar/discuss.px4.io/ke2023/32/13621_2.png) [@Ke2023](https://discuss.px4.io/u/Ke2023)\ **Post date:** [November 14, 2023, 6:51am UTC](https://discuss.px4.io/t/rover-doesnt-move-in-mission-mode-px4/35278/2 "2023-11-14T06:51:06Z")
Hi, you may consider using a telemetry to upload the waypoint mission, and the QGC will also give you reminders for command rejections in this way ---
**Author:** ![dwurmitzer](https://discuss.px4.io/letter_avatar_proxy/v4/letter/d/d2c977/32.png) [@dwurmitzer](https://discuss.px4.io/u/dwurmitzer)\ **Post date:** [November 15, 2023, 4:32pm UTC](https://discuss.px4.io/t/rover-doesnt-move-in-mission-mode-px4/35278/3 "2023-11-15T16:32:36Z")
Unfortunately, I don’t have a telemetry module. I tried it with a MAVLINK Wifi-Module but couldn’t upload the mission because the loss rate was too high. Any other suggestions? ---
**Author:** ![AWilkins\_Ascend](https://discuss.px4.io/user_avatar/discuss.px4.io/awilkins_ascend/32/8388_2.png) [@AWilkins\_Ascend](https://discuss.px4.io/u/AWilkins_Ascend)\ **Post date:** [November 15, 2023, 10:49pm UTC](https://discuss.px4.io/t/rover-doesnt-move-in-mission-mode-px4/35278/4 "2023-11-15T22:49:34Z")
there are a few problems here, so the first is going to be connectivity. unless you modify some parameters (which i do not recommend) you will not be able to launch the vehicle without connecting to a ground station. So, i would recommend getting a cheap pair of telemetry radios: [SiK Telemetry Radio V3 – Holybro Store](https://holybro.com/products/sik-telemetry-radio-v3) ---
**Author:** ![dwurmitzer](https://discuss.px4.io/letter_avatar_proxy/v4/letter/d/d2c977/32.png) [@dwurmitzer](https://discuss.px4.io/u/dwurmitzer)\ **Post date:** [January 13, 2024, 12:58pm UTC](https://discuss.px4.io/t/rover-doesnt-move-in-mission-mode-px4/35278/5 "2024-01-13T12:58:48Z")
Hello, thanks for the suggestion @AWilkins_Ascend. I have bought the SiK Telemetry Radio and now it is at least moving. BUT I have another problem now: The rover is driving to the 1st waypoint and then stops there. That is not what I want. The rover should drive a full circle without stopping. Do you have an idea, what the problem is? ---
**Author:** ![dwurmitzer](https://discuss.px4.io/letter_avatar_proxy/v4/letter/d/d2c977/32.png) [@dwurmitzer](https://discuss.px4.io/u/dwurmitzer)\ **Post date:** [January 13, 2024, 2:44pm UTC](https://discuss.px4.io/t/rover-doesnt-move-in-mission-mode-px4/35278/6 "2024-01-13T14:44:20Z")
Update: In addition to stopping, the rover is loitering around the first waypoint. Don’t know what the problem is. ---
**Author:** ![AWilkins\_Ascend](https://discuss.px4.io/user_avatar/discuss.px4.io/awilkins_ascend/32/8388_2.png) [@AWilkins\_Ascend](https://discuss.px4.io/u/AWilkins_Ascend)\ **Post date:** [January 30, 2024, 5:02pm UTC](https://discuss.px4.io/t/rover-doesnt-move-in-mission-mode-px4/35278/7 "2024-01-30T17:02:48Z")
What is your loiter radius set to? ---
**Author:** ![dwurmitzer](https://discuss.px4.io/letter_avatar_proxy/v4/letter/d/d2c977/32.png) [@dwurmitzer](https://discuss.px4.io/u/dwurmitzer)\ **Post date:** [March 11, 2024, 10:11pm UTC](https://discuss.px4.io/t/rover-doesnt-move-in-mission-mode-px4/35278/8 "2024-03-11T22:11:19Z")
LAV\_ROITER\_RAD = 0.0m NAV\_MIN\_LTR\_ALT = 200.0m ---
**Author:** ![AWilkins\_Ascend](https://discuss.px4.io/user_avatar/discuss.px4.io/awilkins_ascend/32/8388_2.png) [@AWilkins\_Ascend](https://discuss.px4.io/u/AWilkins_Ascend)\ **Post date:** [March 11, 2024, 10:31pm UTC](https://discuss.px4.io/t/rover-doesnt-move-in-mission-mode-px4/35278/9 "2024-03-11T22:31:53Z")
do you mean NAV\_LOITER\_RAD? if so that is just used for fixed wings ---
**Author:** ![AWilkins\_Ascend](https://discuss.px4.io/user_avatar/discuss.px4.io/awilkins_ascend/32/8388_2.png) [@AWilkins\_Ascend](https://discuss.px4.io/u/AWilkins_Ascend)\ **Post date:** [March 11, 2024, 10:32pm UTC](https://discuss.px4.io/t/rover-doesnt-move-in-mission-mode-px4/35278/10 "2024-03-11T22:32:29Z")
> [@dwurmitzer](#): > > NAV\_MIN\_LTR\_ALT What is NAV\_ACC\_RAD set to ---
**Author:** ![dwurmitzer](https://discuss.px4.io/letter_avatar_proxy/v4/letter/d/d2c977/32.png) [@dwurmitzer](https://discuss.px4.io/u/dwurmitzer)\ **Post date:** [March 11, 2024, 10:55pm UTC](https://discuss.px4.io/t/rover-doesnt-move-in-mission-mode-px4/35278/11 "2024-03-11T22:55:09Z")
NAV\_ACC\_RAD is set to 1.0m