# Radiolink Mini Pix

**URL:** <https://discuss.px4.io/t/radiolink-mini-pix/18237>\
**Category:** Uncategorized\
**Created:** [August 21, 2020, 11:33pm UTC](https://discuss.px4.io/t/radiolink-mini-pix/18237 "2020-08-21T23:33:58Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![quadman](https://discuss.px4.io/letter_avatar_proxy/v4/letter/q/ee59a6/32.png) [@quadman](https://discuss.px4.io/u/quadman)\
**Post date:** [August 21, 2020, 11:33pm UTC](https://discuss.px4.io/t/radiolink-mini-pix/18237/1 "2020-08-21T23:33:58Z")

</div>

Hello all!

I am working on a project to build an autonomous quadcopter that uses image recognition to land on a ground target. I needed a small flight controller that supports PX4, however, the Pixhawk mini was discontinued. I bought the Radiolink Mini Pix, but there isn’t much documentation. I’ve seen some setup with ardupilot, but nothing with PX4.

Does anyone have experience using this that could lead me in the right direction?

---

<div class="post-metadata">

**Author:** ![auturgy](https://discuss.px4.io/letter_avatar_proxy/v4/letter/a/e480ec/32.png) [@auturgy](https://discuss.px4.io/u/auturgy)\
**Post date:** [August 22, 2020, 2:13am UTC](https://discuss.px4.io/t/radiolink-mini-pix/18237/2 "2020-08-22T02:13:09Z")

</div>

As far as I know there’s no existing PX4 support for them, so you kind of have 3 choices: replace it with something like a PixRacer, or use ArduPilot, or add PX4 support for it.

---

<div class="post-metadata">

**Author:** ![quadman](https://discuss.px4.io/letter_avatar_proxy/v4/letter/q/ee59a6/32.png) [@quadman](https://discuss.px4.io/u/quadman)\
**Post date:** [August 25, 2020, 10:11pm UTC](https://discuss.px4.io/t/radiolink-mini-pix/18237/3 "2020-08-25T22:11:40Z")

</div>

Thanks very much. I’m just going to bite the bullet and buy the PX4 Mini from Holybro