# QGC AppImage not installing- running RPi4

**URL:** <https://discuss.px4.io/t/qgc-appimage-not-installing-running-rpi4/31017>\
**Category:** QGroundControl\
**Created:** [February 25, 2023, 6:41pm UTC](https://discuss.px4.io/t/qgc-appimage-not-installing-running-rpi4/31017 "2023-02-25T18:41:39Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Redrc](https://discuss.px4.io/letter_avatar_proxy/v4/letter/r/e99b99/32.png) [@Redrc](https://discuss.px4.io/u/Redrc)\
**Post date:** [February 25, 2023, 6:41pm UTC](https://discuss.px4.io/t/qgc-appimage-not-installing-running-rpi4/31017/1 "2023-02-25T18:41:39Z")

</div>

Hi ,

I can not get QGroundControl.AppImage to install on RPi4/ Linux,  
despite trying latest RaspberyPi OS, latest Ubuntu, Libfuse2, gstreamer,  
etc as per docs.PX4 instructions. It says “executable”& “binary” -but  
does not open/execute in any way.

Much appreciated,

Redrc.

---

<div class="post-metadata">

**Author:** ![Redrc](https://discuss.px4.io/letter_avatar_proxy/v4/letter/r/e99b99/32.png) [@Redrc](https://discuss.px4.io/u/Redrc)\
**Post date:** [February 25, 2023, 11:44pm UTC](https://discuss.px4.io/t/qgc-appimage-not-installing-running-rpi4/31017/2 "2023-02-25T23:44:52Z")

</div>

PS: Permissions are already set to owner- I even tried Anyone. Still not executing on screen.

---

<div class="post-metadata">

**Author:** ![Artem\_Borisov](https://discuss.px4.io/user_avatar/discuss.px4.io/artem_borisov/32/9999_2.png) [@Artem\_Borisov](https://discuss.px4.io/u/Artem_Borisov)\
**Post date:** [February 27, 2023, 12:24pm UTC](https://discuss.px4.io/t/qgc-appimage-not-installing-running-rpi4/31017/3 "2023-02-27T12:24:43Z")

</div>

As I know, QGroundControl.AppImage compile for x86, but RPi is ARM v8. You need cross-compile QGC from source code.

> [@QGC on raspberry pi](https://discuss.px4.io/t/qgc-on-raspberry-pi/17270/9):
>
> lo instale en la raspberry pi 4 en raspbian 32 bits con mono pero es muy lenta. Lo tengo ahora con manjaro 64 bits y funciona genial. Instala manjaro minimal, despues el escritorio lxqt, ellos lo hicieron pot ti, esta listo en los repos arch4. Eso es todo

> **[Release Rpi CM4 Ubuntu 20.10 Qt5 version 5.14.2 · matthewoots/qgroundcontrol](https://github.com/matthewoots/qgroundcontrol/releases/tag/v4.0.0)**
>
> Rpi CM4 Ubuntu 20.10 Qt5 version 5.14.2
> If there are anything missing or not able to launch, please download the dependencies and read the README.md
> Most help is from https://discuss.ardupilot.org/...

> **[How to cross-compile QGroundControl for Raspberry Pi3](https://discuss.ardupilot.org/t/how-to-cross-compile-qgroundcontrol-for-raspberry-pi3/26790/42)**
>
> So, here is short guide how to build QGC on Raspbian Buster with default Qt5 from repos. The exact steps and dependencies may vary, depend on what was already installed on your system: Get the last Rasbian Buster image Update and upgrade it...

---

<div class="post-metadata">

**Author:** ![Redrc](https://discuss.px4.io/letter_avatar_proxy/v4/letter/r/e99b99/32.png) [@Redrc](https://discuss.px4.io/u/Redrc)\
**Post date:** [February 27, 2023, 12:53pm UTC](https://discuss.px4.io/t/qgc-appimage-not-installing-running-rpi4/31017/4 "2023-02-27T12:53:06Z")

</div>

Thanks Artem.  
These are for older RPi3 Buster.

1.Is there any for latest RPi4B Bullseye?  
2. So much coding… is there a ready file somewhere for installation?  
3. I would like to go back to Raspberry OS, and remove Ubuntu, (as I have lost touch screen magnification by two fingers after installing latest ubuntu.)?

Thanks so much,  
Redrc

---

<div class="post-metadata">

**Author:** ![Artem\_Borisov](https://discuss.px4.io/user_avatar/discuss.px4.io/artem_borisov/32/9999_2.png) [@Artem\_Borisov](https://discuss.px4.io/u/Artem_Borisov)\
**Post date:** [February 27, 2023, 4:21pm UTC](https://discuss.px4.io/t/qgc-appimage-not-installing-running-rpi4/31017/5 "2023-02-27T16:21:10Z")

</div>

> [@Redrc](#):
>
> 1.Is there any for latest RPi4B Bullseye?

I think the steps are same.

> [@Redrc](#):
>
> 1. So much coding… is there a ready file somewhere for installation?

Really don’t know, I didn’t do this. But many people are wrote: “It’s imposible”, and only few one said “I did it!”

> [@Redrc](#):
>
> 1. I would like to go back to Raspberry OS, and remove Ubuntu, (as I have lost touch screen magnification by two fingers after installing latest ubuntu.)?

Raspberry OS isn’t worse than ubuntu. Your trouble isn’t in OS( or not only in OS).

Good luck!
