# PX4 Dev Call: September 08, 2021

**URL:** <https://discuss.px4.io/t/px4-dev-call-september-08-2021/24042>\
**Category:** PX4 Autopilot\
**Created:** [September 1, 2021, 5:01pm UTC](https://discuss.px4.io/t/px4-dev-call-september-08-2021/24042 "2021-09-01T17:01:47Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![rroche](https://discuss.px4.io/user_avatar/discuss.px4.io/rroche/32/17635_2.png) [@rroche](https://discuss.px4.io/u/rroche)\
**Post date:** [September 1, 2021, 5:01pm UTC](https://discuss.px4.io/t/px4-dev-call-september-08-2021/24042/1 "2021-09-01T17:01:47Z")

</div>

# September 08, 2021

## Join us

> **[Jitsi Meet](https://meet.jit.si/PX4DeveloperCallWeekly)**
>
> Join a WebRTC video conference powered by the Jitsi Videobridge

## Agenda

- Community Q&A
- Roadmap
- High priority queue
- Release
- In-Depth discussions

* * *

## Announcements

- Next week the developer call is canceled because we’ll be at the PX4 Developer Summit.

## Community Q&A

- @david_s5 12 cell Li-po/ion power module support: So far fmu-v5x usually comes with a 6S compatible INA226 power module. Holybro will be providing a power module with an INA228 on to support 12S batteries. The software support for it to work out of the box is currently work in progress.

- @MaEtUgR Pull request to allow configuring a margin for the horizontal multicopter control authority when the vertical control is saturated: [MulticopterPositionControl: add horizontal margin for vertical saturation cases by MaEtUgR · Pull Request #18205 · PX4/PX4-Autopilot · GitHub](https://github.com/PX4/PX4-Autopilot/pull/18205)

- @david_s5 and @rroche had an issue recently where the virtual joystick would make an autopilot to beep for presumably failsafe when using it over USB:  
[QGC when Virtual Joystick enabled FMU goes to Fail Safe connect on USB · Issue #18054 · PX4/PX4-Autopilot · GitHub](https://github.com/PX4/PX4-Autopilot/issues/18054)

- Vatsal Joshi: What are the instances where you get a PWM count error. He’s configuring PWM and then tries to test it but gets the error. It’s likely a configuration issue. `pwm_out test` should get all outputs to fade from low to high values.

- Dave Walter: Is contributing to the documentation explicitly on how to integrate a stand-alone smart gimbal with MAVLink and PX4: [Integrated Camera/Gimbal Systems Documentation · Issue #1678 · mavlink/mavlink · GitHub](https://github.com/mavlink/mavlink/issues/1678)  
In the hope to get better manufacturer integration from e.g. Trillium, Nextvision, … so if you’re a manufacturer or gimbal-interested developer chime in. @JulianOes is very interested and already joined the discussion.

- Farhang Naderi: Asking what should be tested. Please test the new point release especially also with the newest boards. Thanks!

## Release

New point release is out **1.12.3** :

> **[Release Stable Release v1.12.3 · PX4/PX4-Autopilot](https://github.com/PX4/PX4-Autopilot/releases/tag/v1.12.3)**
>
> Enable Cube Orange built in ADS-B receiver by default: #18188
> fixed flash overflow on px4\_fmu-v2\_default and px4\_fmu-v5\_optimized

## Roadmap

Discussion based on board: [https://github.com/orgs/PX4/projects/25](https://github.com/orgs/PX4/projects/25)

## High priority queue

Discussion based on board: [https://github.com/orgs/PX4/projects/24](https://github.com/orgs/PX4/projects/24)

## In-Depth discussions

- Device tree: It would be nice to have a UI showing what devices are connected on which bus and the user can select what to enable and it will be required from thereon.

* * *

If you have any feedback or corrections please comment on this post.
