# PX4 Dev Call: November 24, 2021

**URL:** <https://discuss.px4.io/t/px4-dev-call-november-24-2021/25070>\
**Category:** PX4 Autopilot\
**Created:** [November 17, 2021, 6:00pm UTC](https://discuss.px4.io/t/px4-dev-call-november-24-2021/25070 "2021-11-17T18:00:41Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![rroche](https://discuss.px4.io/user_avatar/discuss.px4.io/rroche/32/17635_2.png) [@rroche](https://discuss.px4.io/u/rroche)\
**Post date:** [November 17, 2021, 6:00pm UTC](https://discuss.px4.io/t/px4-dev-call-november-24-2021/25070/1 "2021-11-17T18:00:42Z")

</div>

# November 24, 2021

## Join us

> **[Jitsi Meet](https://meet.jit.si/PX4DeveloperCallWeekly)**
>
> Join a WebRTC video conference powered by the Jitsi Videobridge

## Agenda

- Community Q&A
- Project Updates
- High priority queue
- Release
- In-Depth discussions

* * *

## Community Q&A

Raise your questions! There were no questions asked.

## Project Updates

- @farhang Was successfully testing master indoor on a Holybro S500 and QAV250 concentrating on RC usage and stable manual indoor flight.

- @MaEtUgR manual control cleanup was merged and there are some smaller follow-ups:

- @MaEtUgR Triggering RTL when remaining flight time + a margin gets below planned RTL time

- @JulianOes A bigger issue in QGC got fixed: [Loss of MAVLink transmission when enabling joystick · Issue #9022 · mavlink/qgroundcontrol · GitHub](https://github.com/mavlink/qgroundcontrol/issues/9022)  
The fixing pr is here: [Force write bytes to happen on correct thread by DonLakeFlyer · Pull Request #9976 · mavlink/qgroundcontrol · GitHub](https://github.com/mavlink/qgroundcontrol/pull/9976)  
Please test if you find any corner case.

- @JulianOes Found an issue with MAVSDK where in SITL tests it could sometimes check the mission before it was uploaded. In such cases, it would get stuck in the test. Not all CI cases failing because of timing issues were found yet. Discussion about mission feasibility communication over MAVLink.

- @dagar A bug in NuttX was found where if you logged with a very high rate on an F7 the SD card could get corrupted after a certain random time.  
[NuttX stm32f7:sdmmc defer invalidate until after DMA completion by dagar · Pull Request #18687 · PX4/PX4-Autopilot · GitHub](https://github.com/PX4/PX4-Autopilot/pull/18687)

## High priority queue

Discussion based on board: [https://github.com/orgs/PX4/projects/24](https://github.com/orgs/PX4/projects/24)

## Release

## In-Depth discussions

For smaller groups expanding technical discussions, stay until the end and follow up.

* * *

If you have any feedback or corrections please comment on this post.
