# No Baro Sensor 0 Error

**URL:** <https://discuss.px4.io/t/no-baro-sensor-0-error/2795>\
**Category:** PX4 Autopilot\
**Created:** [March 17, 2017, 5:35pm UTC](https://discuss.px4.io/t/no-baro-sensor-0-error/2795 "2017-03-17T17:35:35Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ayaan630](https://discuss.px4.io/letter_avatar_proxy/v4/letter/a/f07891/32.png) [@Ayaan630](https://discuss.px4.io/u/Ayaan630)\
**Post date:** [March 17, 2017, 5:35pm UTC](https://discuss.px4.io/t/no-baro-sensor-0-error/2795/1 "2017-03-17T17:35:35Z")

</div>

Can the error be neglected during preflight checks by manipulating the firmware and neglecting the barometer cause we are already using LIDAR Lite just for the sake of measurement of height so it doesn’t matter what gives the height so is there any way to neglect the error for the Pixhawk?

---

<div class="post-metadata">

**Author:** ![sanbhu\_cpaas](https://discuss.px4.io/letter_avatar_proxy/v4/letter/s/9e8a1a/32.png) [@sanbhu\_cpaas](https://discuss.px4.io/u/sanbhu_cpaas)\
**Post date:** [February 14, 2019, 12:22am UTC](https://discuss.px4.io/t/no-baro-sensor-0-error/2795/2 "2019-02-14T00:22:10Z")

</div>

Were you able to solve the No Baro Sensor 0 error?