# FPV VTX Connecting to Holybro 6X **URL:** \ **Category:** PX4 Autopilot\ **Created:** [September 5, 2025, 9:43am UTC](https://discuss.px4.io/t/fpv-vtx-connecting-to-holybro-6x/47303 "2025-09-05T09:43:33Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![diana\_diaz](https://discuss.px4.io/user_avatar/discuss.px4.io/diana_diaz/32/17453_2.png) [@diana\_diaz](https://discuss.px4.io/u/diana_diaz)\ **Post date:** [September 5, 2025, 9:43am UTC](https://discuss.px4.io/t/fpv-vtx-connecting-to-holybro-6x/47303/1 "2025-09-05T09:43:33Z")
Hey I am Flying a Mini Talon V-Tail with PX4-Autopilot 1.14.3. I Had used a lot of Digital FPV systems but I am more comfortabe with Analog VTX’s The digital ones I could connect via Telem Port to the Caddx Vista modules and got the OSD. But now I want to use the Foxeer Reaper VTX ([Foxeer 5.8G Reaper Extreme 1.8W 72CH VTx](https://www.foxeer.com/foxeer-5-8g-reaper-extreme-1-8w-72ch-vtx-g-574)) which is analog. Dos anyone can help me how to connect it to my Flightcontroller to get the OSD with all Data ? Thanks in advance ---
**Author:** ![jackfeng](https://discuss.px4.io/user_avatar/discuss.px4.io/jackfeng/32/20247_2.png) [@jackfeng](https://discuss.px4.io/u/jackfeng)\ **Post date:** [September 8, 2025, 7:03am UTC](https://discuss.px4.io/t/fpv-vtx-connecting-to-holybro-6x/47303/2 "2025-09-08T07:03:00Z")
For analog you don’t use the TELEM port — you need to run the camera → FC video in, then FC video out → VTX. The OSD chip in the Pixhawk will overlay flight data onto the video feed automatically. Just wire the Foxeer Reaper like any other analog VTX: power + ground + video in from the FC’s “OSD out”. ---
**Author:** ![diana\_diaz](https://discuss.px4.io/user_avatar/discuss.px4.io/diana_diaz/32/17453_2.png) [@diana\_diaz](https://discuss.px4.io/u/diana_diaz)\ **Post date:** [September 8, 2025, 8:53pm UTC](https://discuss.px4.io/t/fpv-vtx-connecting-to-holybro-6x/47303/3 "2025-09-08T20:53:03Z")
Sorry I forgot to mention I am usin Holybro 6c Mini and holybo 6X. There is no Video port only telem rc i2c and ps ports ---
**Author:** ![jackfeng](https://discuss.px4.io/user_avatar/discuss.px4.io/jackfeng/32/20247_2.png) [@jackfeng](https://discuss.px4.io/u/jackfeng)\ **Post date:** [September 9, 2025, 3:23am UTC](https://discuss.px4.io/t/fpv-vtx-connecting-to-holybro-6x/47303/4 "2025-09-09T03:23:51Z")
Ah got it — the Holybro Pixhawk 6C/6X don’t have the analog OSD hardware onboard, only digital telemetry. That means you can’t do analog OSD directly through the FC. You’ll need an external OSD board (like a MinimOSD or Matek OSD) between camera and VTX if you want the flight data overlay. ---
**Author:** ![diana\_diaz](https://discuss.px4.io/user_avatar/discuss.px4.io/diana_diaz/32/17453_2.png) [@diana\_diaz](https://discuss.px4.io/u/diana_diaz)\ **Post date:** [September 11, 2025, 6:11am UTC](https://discuss.px4.io/t/fpv-vtx-connecting-to-holybro-6x/47303/5 "2025-09-11T06:11:26Z")
Oh okay, is it this thing? > **[Micro OSD V2](https://holybro.com/products/micro-osd-v2)** > > VTX & OSD Specifications: ATmega328P with Arduino bootloader MAX7456 monochrome on-screen display GHR connectors Solder jumper for PAL video option Exposed test points for HSYNC and LOS Dimensions:17.5\*35mm Weight:3g Note: BAT+ is directly... Is there any good user description/manual? ---
**Author:** ![jackfeng](https://discuss.px4.io/user_avatar/discuss.px4.io/jackfeng/32/20247_2.png) [@jackfeng](https://discuss.px4.io/u/jackfeng)\ **Post date:** [September 11, 2025, 6:22am UTC](https://discuss.px4.io/t/fpv-vtx-connecting-to-holybro-6x/47303/6 "2025-09-11T06:22:42Z")
> [@diana\_diaz](#): > > Is there any good user description/manual? yes User Manual: > **[HolyBro-Micro-OSD-V2-Manual-with-HolyBro-formatting-v0.1-copy.pdf](https://www.flyingtech.co.uk/wp-content/uploads/2021/03/HolyBro-Micro-OSD-V2-Manual-with-HolyBro-formatting-v0.1-copy.pdf?utm_source=chatgpt.com)** > > 963.72 KB ---
**Author:** ![system](https://discuss.px4.io/uploads/default/original/3X/7/3/73ce918bdcd64854de904f0c8d9ab70ca9723f2a.png) [@system](https://discuss.px4.io/u/system)\ **Post date:** [December 10, 2025, 6:23am UTC](https://discuss.px4.io/t/fpv-vtx-connecting-to-holybro-6x/47303/7 "2025-12-10T06:23:23Z")
This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.