# Flight mode "stabilized" limits elevator travel/range

**URL:** <https://discuss.px4.io/t/flight-mode-stabilized-limits-elevator-travel-range/14308>\
**Category:** PX4 Autopilot\
**Created:** [December 13, 2019, 10:29am UTC](https://discuss.px4.io/t/flight-mode-stabilized-limits-elevator-travel-range/14308 "2019-12-13T10:29:00Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![FlyingHook](https://discuss.px4.io/letter_avatar_proxy/v4/letter/f/bb73d2/32.png) [@FlyingHook](https://discuss.px4.io/u/FlyingHook)\
**Post date:** [December 13, 2019, 10:29am UTC](https://discuss.px4.io/t/flight-mode-stabilized-limits-elevator-travel-range/14308/1 "2019-12-13T10:29:00Z")

</div>

Hello folks,

i have a V-Tail plane set up on a PX4. When using the “manual” flight mode, i have full elevator authority, but when i switch to “stabilized”, i can only move the elevator about half the way.

Am i missing out on something obvious? Already tried to play with the max/min PWM outputs, no progress there.

Thank you in advance!