# Flight Controller not being connected to QGC

**URL:** <https://discuss.px4.io/t/flight-controller-not-being-connected-to-qgc/28097>\
**Category:** MAVLink\
**Created:** [June 29, 2022, 11:54pm UTC](https://discuss.px4.io/t/flight-controller-not-being-connected-to-qgc/28097 "2022-06-29T23:54:14Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Caleb\_Rievley](https://discuss.px4.io/user_avatar/discuss.px4.io/caleb_rievley/32/10370_2.png) [@Caleb\_Rievley](https://discuss.px4.io/u/Caleb_Rievley)\
**Post date:** [June 29, 2022, 11:54pm UTC](https://discuss.px4.io/t/flight-controller-not-being-connected-to-qgc/28097/1 "2022-06-29T23:54:14Z")

</div>

Below are the console messages when connecting a VOXL Flight board to my computer running QGC. The board was working properly until it wasnt and now QGC does not recognize a flight controller being connected.

[D] at D:\a\qgroundcontrol\qgroundcontrol\src\comm\LinkManager.cc:210 - “LinkManager::\_linkDisconnected “PX4 FMU ModalAI FCv1 on COM3 (AutoConnect)” 1”  
[D] at D:\a\qgroundcontrol\qgroundcontrol\src\comm\LinkManager.cc:599 - "Waiting for next autoconnect pass “\\.\COM3"”  
[D] at D:\a\qgroundcontrol\qgroundcontrol\src\comm\LinkManager.cc:640 - "New auto-connect port added: “PX4 FMU ModalAI FCv1 on COM3 (AutoConnect)” “\\.\COM3"”  
[D] at D:\a\qgroundcontrol\qgroundcontrol\src\comm\LinkManager.cc:865 - “allocateMavlinkChannel 3”

After this point what should I be looking for or what can do to get the board back to working properly?