Pixhawk


Topic Replies Activity
PREFLIGHT FAIL: MAG2 SELFTEST - With firmware 1.8.2 and PIXHAWK 3 PRO with external GPS/MAGNETOMETER 15 July 1, 2019
How to see the px4iofirmware/mixer.cpp debug message? 3 June 28, 2019
LIS3MDL Compass on AltIMU-10 v5 3 June 26, 2019
Can't connect to pixhawk4 from system console 3 June 26, 2019
No GPS fix using pixhawk 4 1 June 25, 2019
Pixhawk's airspeed meter support problem. 1 June 21, 2019
Maintaining altitude problem 1 June 20, 2019
Holybro Airspeed Sensor Tubing Connection 2 June 19, 2019
Pixhawk 4 PWM to DALRC Engine 3 June 18, 2019
Connections to PixHawk4 + Power Management Board Connections for Rover 1 June 17, 2019
Pixhawk entering Failsafe mode from ALTITUDE mode 1 June 17, 2019
PX4 SITL Matlab 1 June 14, 2019
Dodecarotor cox wiring 2 June 13, 2019
Pixhawk/PX4 ignores RC-commands 1 June 12, 2019
Only half of the motors are spinning 10 June 12, 2019
No local position preventing copter from going into Position Hold 1 June 7, 2019
Px4flow sensor issue 1 June 6, 2019
Pixhawk 4 mini Preflight Fail 20 June 4, 2019
Crash with px4 v1.9.0 1 June 3, 2019
Serial Console on Pixhawk 4 4 June 3, 2019
JR XG6 DMSS reciever compatibility 1 June 2, 2019
Pixhawk Redundancy 2 June 1, 2019
Integration of Pixhawk 4 and Marvelmind indoor GPS 3 May 31, 2019
Pixhawk 4 mini Attitude estimator nur running 1 May 31, 2019
Quadcopter drifts heavily in Position Hold mode 2 May 30, 2019
PWM_DISARMED value is not properly set for main outputs 1 May 27, 2019
Yaw setpoint keeps jumping from 180 to -180 2 May 25, 2019
Velocity limits during Offboard SET_ATTITUDE_TARGET control 3 May 24, 2019
GPS reject position flight mode 8 May 23, 2019
Pixhawk 4 debug through JTAG OpenOCD 1 May 20, 2019