LPE master doesn't work with PX4Flow master

I almost completely sure i missed something but LPE seems doesn’t fuse optical flow from px4flow correctly.
Setup:
PX4 Firmware: master
PX4Flow: master
Pixhawk: v2
LPE: enabled optical flow
cmake nuttx_px4fmu-v2_lpe
Camera: px4flow
Distance sensor: Laser (not the utrasonic rangefinder from px4flow)
Symptoms:
NED position get from LPE is irrelevant.
Links to logs:

https://drive.google.com/file/d/0ByDDImhSolf6UGVRdl9iaGsyR3M/view?usp=sharing
https://drive.google.com/file/d/0ByDDImhSolf6ZEpEYmljOFhQRVU/view?usp=sharing
https://drive.google.com/file/d/0ByDDImhSolf6QnFoal9HRzZRVFU/view?usp=sharing
https://drive.google.com/file/d/0ByDDImhSolf6SUVxOUFBaGhzT3M/view?usp=sharing

I appreciate any hints and ideas about what’s going on. Completely stuck here.
Thanks a lot and best regards.

1 Like

I can’t look at your log, it might be corrupted. Can you upload your log here: logs.px4.io/upload